Embedded Interfaces like LED, Pull up and Pull down, Button, 7 Segment Display, LCD, Matrix Keypad, Interrupt, Timer, Counter, DC Motor, Stepper Motor, Servo Motor, ADC, I2C, UART (Serial), SPI, PWM, GPS, GSM, WiFi, ZigBee, EEPROM(Internal), EEPROM(External).
Contents
Sitemap
Embedded Interface 7 Segment (Add Soon) |
Embedded Interface ADC (Add Soon) |
Embedded Interface Button (Add Soon) |
Embedded Interface EEPROM (Add Soon) |
Embedded Interface LCD (Add Soon) |
Embedded Interface LCD HD44780 (Add Soon) |
Embedded Interface LED |
Embedded Interface MCP23017 |
Embedded Interface Motor (Add Soon) |
Embedded Interface PCF8574 and PCF8574A |
Embedded Interface RTC (Add Soon) |
Embedded Interface Switch |
Embedded Interface Touch Kypad |
Embedded Interface RGB LED (Add Soon) |
Embedded Peripherals Interface Logic
Pull Up/Pull Down Logic
Pull Up Resistors
Pull Down Resistor
Interrupt Logic
- Different types of interrupts
- Hardware Interrupts
- Button Interrupt
- Sensor Interrupt
- Software Interrupt
- Timer interrupt
- Hardware Interrupts
Embedded Applications
- Timer
- Counter
- Auto Counter Display using 7 Segment
- Auto Counter Display using LCD
- Counter Display by Button using 7 Segment
- Counter Display by Button using LCD
Bit Banging
- Bit banging is a technique for serial communication using software instead of dedicated hardware.
- Bit banging can be implemented at very low cost, and its used in, for example embedded system.
Using I2C and SPI communication on the same same clock and data lines