echo '' ;

ESP32 ArduinoCore Interface – ADC

The “ESP32 ArduinoCore Interface – ADC” provides a seamless integration between the ESP32 microcontroller and the Arduino development environment, specifically focusing on the Analog-to-Digital Converter (ADC) functionality.

ADC

TermDescription
ADCAnalog-to-Digital Converter – A device or circuit that converts analog signals to digital data.
FunctionalityConverts continuous analog signals into discrete digital values.
ProcessSamples the analog input signal at regular intervals and quantizes the sampled values into digital values.
ApplicationsUsed in microcontrollers, data acquisition systems, sensors, audio equipment, communication devices, and more.
ResolutionThe number of digital bits used to represent the analog signal. Higher resolution ADCs provide more precise representations.
Sampling RateDetermines how frequently the ADC samples the analog input signal. Higher sampling rates enable more accurate representation of fast-changing signals.
TypesSuccessive approximation, delta-sigma, pipeline, and flash ADCs are common types, each with specific advantages and applications.
InterfaceInterfaces with digital systems such as microcontrollers or computers, where the digital output values can be processed or stored.

ADC Pins

PinADC ChannelGPIO Number
GPIO32ADC1_CH432
GPIO33ADC1_CH533
GPIO34ADC1_CH634
GPIO35ADC1_CH735
GPIO36ADC1_CH036
GPIO37ADC1_CH137
GPIO25ADC2_CH825
GPIO26ADC2_CH926

This table lists the ADC pins available on the ESP32 microcontroller along with their corresponding ADC channels and GPIO numbers.

Code

/*
  AnalogReadSerial
  Reads an analog input on pin 0, prints the result to the serial monitor.
  Graphical representation is available using serial plotter (Tools > Serial Plotter menu)
  Attach the center pin of a potentiometer to pin A0, and the outside pins to +5V and ground.

  This example code is in the public domain.
*/

// the setup routine runs once when you press reset:
void setup() {
  // initialize serial communication at 9600 bits per second:
  Serial.begin(9600);
}

// the loop routine runs over and over again forever:
void loop() {
  
  // read the input on analog pin 0:
  int sensorValue = analogRead(A0);
  // print out the value you read:
  
  Serial.println(sensorValue);
  delay(1);        // delay in between reads for stability
}

Code Explanation of ESP32 ArduinoCore Interface ADC

Code Purpose: Reading an analog input from pin A0 and printing the value to the serial monitor.

Setup Routine: This part of the code initializes serial communication at a baud rate of 9600 bits per second.

   // the setup routine runs once when you press reset:
   void setup() {
     // initialize serial communication at 9600 bits per second:
     Serial.begin(9600);
   }

Loop Routine:

  1. This section continuously reads the analog value from pin A0 using the analogRead() function.
  2. It then prints the value to the serial monitor using Serial.println().
  3. A small delay of 1 millisecond is added between reads for stability using delay().
   // the loop routine runs over and over again forever:
   void loop() {
     // read the input on analog pin 0:
     int sensorValue = analogRead(A0);
     // print out the value you read:
     Serial.println(sensorValue);
     delay(1);        // delay in between reads for stability
   }

Overall Functionality: This code can be useful for testing analog sensors or for basic data-logging applications.

Advantage of ESP32 ArduinoCore Interface ADC

AdvantageDescription
Analog Signal ProcessingADCs enable microcontrollers to process analog signals from the physical world, converting them into digital values that can be processed by digital systems.
Sensor InterfacingADCs facilitate interfacing with various sensors that produce analog output, such as temperature sensors, light sensors, and pressure sensors, allowing accurate measurement and response to real-world phenomena.
Signal ConditioningADCs can be used for signal conditioning tasks, including amplification, filtering, and noise reduction, before converting analog signals to digital form, improving accuracy and reliability of measured data.
Data AcquisitionADCs enable microcontrollers to acquire data from analog sources at high speeds and with high precision, suitable for applications such as data logging, instrumentation, and control systems.
VersatilityADCs come in various resolutions, sampling rates, and input voltage ranges, allowing developers to choose the most suitable ADC for their specific application requirements.
IntegrationMany microcontrollers, including the ESP32, feature built-in ADCs, eliminating the need for external ADC components and reducing system complexity and cost.

NEXT

Arduino-Core Get Start (Soon)
ESP32 Arduino Core Interface
ArduinoCore Interface Basics
ArduinoCore Interface WiFi
ArduinoCore Interface – LED
ArduinoCore Interface ADC
ArduinoCore Interface DS18B20
ESP32 Arduino Core Projects
ArduinoCore Project – WebServer
Others
Arduino-Core Sitemap
Arduino-Core All Post

Leave a Reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Discover more from ArunEworld

Subscribe now to keep reading and get access to the full archive.

Continue reading